home *** CD-ROM | disk | FTP | other *** search
/ The World's Largest Collection of Windows Software / The World's Largest Collection of Windows Software - Disc 1.iso / win / pro86 / ticker.man < prev    next >
Text File  |  1992-09-25  |  9KB  |  229 lines

  1.  
  2.  
  3.  
  4. TICKER (c) 1992 Management Systems Group
  5. ----------------------------------------
  6.  
  7. Ticker is a program we have written to provide you with a diversion from 
  8. the hum-drum work you should be doing on your PC.  Please help us help 
  9. you avoid doing real work by sending a $15 donation to the following 
  10. address if you use and enjoy Ticker: 
  11.  
  12.                       Management Systems Group
  13.                       P.O. Box 768
  14.                       Havertown, PA  19083
  15.                       (215) 446-9083
  16.  
  17. Currently, full databases are available for each of the categories in the 
  18. sampler database.  Other databases have probably also been added since 
  19. this writing.  Databases are available to registered users for $5.00 plus 
  20. $1.00 shipping and handling (specify disk format, please).
  21.  
  22. A list of available databases can be obtained by sending a self-
  23. addressed, stamped envelope to the above address. 
  24.  
  25.  
  26. *************************** INTRODUCTION ****************************
  27.  
  28. Ticker displays, either continuously or on command, short text items, 
  29. selected from a database.  These short text items can be jokes, sayings, 
  30. trivia, messages, or anything else.  All items in a database are 
  31. categorized and databases can be restricted so that only items from 
  32. selected categories will be displayed.  This packaged version of Ticker 
  33. comes with one database, the Sampler database, but other databases are 
  34. also available.
  35.  
  36. The final section of this manual, ROLLING YOUR OWN, describes how to use 
  37. the TICKPACK utility to generate your own databases. 
  38.  
  39.  
  40.  
  41. ************************ INSTALLING TICKER **************************
  42.  
  43. There are two versions of Ticker, one for DOS and one for Windows.  Both 
  44. of these programs should be installed in the same directory, so simply
  45. create a directory (for example MD C:\TICKER) and copy all of these files 
  46. into it.  If you only plan to use the DOS version of Ticker, you are 
  47. done, and can go on to the USING DOS TICKER section. 
  48.  
  49. To install Ticker into Windows, start up Windows.  Click one time in the 
  50. program group you in which you wish Ticker to be placed, and select New 
  51. from the File menu, indicating that you wish you add a new item.  Type in 
  52. "Ticker" for Program Description then click on the "Browse..." option.  
  53. Find the Ticker directory you created, and double-click on "wintick.exe".  
  54. Then click on OK to return to the previous box, and click on OK in that 
  55. box also.  (Instead of using "Browse...", you can just type WINTICK.EXE 
  56. preceded by its full path in the "Command Line" field and, for users of 
  57. Windows 3.1, aldo in the "Working Directory" field.  For example, if you 
  58. installed Ticker in the default c:\ticker directory, you would type 
  59. "c:\ticker\wintick.exe" in those fields.) 
  60.  
  61. If you installed Ticker properly, the circular Ticker icon will appear in 
  62. your specified group.  You may run it by double-clicking the icon.  The 
  63. on-line help facility should be able to guide you through learning how to 
  64. use Ticker. 
  65.  
  66.  
  67.  
  68. *************** USING THE DOS VERSION OF TICKER *************** 
  69.  
  70. The first time Ticker is run, it will immediately prompt you to select a 
  71. database and setup options.  Thereafter, the previous options will be 
  72. restored whenever the program is run.  Ticker will then continue running
  73. until you press "q" for "quit".  (Note: if you run Ticker with a "/Q"
  74. parameter [TICKER /Q], then it will display one text item and return
  75. immediately to DOS.
  76.  
  77.  
  78. Selecting a Database
  79. --------------------
  80.  
  81. The first time Ticker is run, the database form will be brought up 
  82. automatically.  Thereafter, you must press 'd' while Ticker is running to 
  83. change databases.  Use the up and down arrow keys, move the cursor until 
  84. the title of the database you wish to load is highlighted, then press 
  85. ENTER.  If you wish to exit the form without selecting a new database, 
  86. press ESC. 
  87.  
  88.  
  89. Changing Options
  90. ----------------
  91.  
  92. This form will also be called automatically the first time Ticker is run, 
  93. immediately after a database is selected.  Thereafter, you must press 'o' 
  94. while ticker is running to change these options.  Enter all relevant 
  95. options and then press F10 (or ENTER from the last field) to accept your 
  96. entries and leave the form.  Press ESC to cancel any changes you have 
  97. made.  Following are explanations of each option.
  98.  
  99. Auto Advance Mode:  Enter 'Y' to have ticker advance the database 
  100.                     automatically or 'N' to require the user to press
  101.                     ENTER or 'j' (for Jump) to display subsequent
  102.                     text items.
  103.  
  104. Seconds to Wait:    The number of seconds to wait before advancing the 
  105.                     database.  Only meaningful when Auto Advance Mode is 
  106.                     ON (i.e. 'Y'). 
  107.  
  108. Maximum Width:      This sets the width of the Ticker window in 
  109.                     characters, where 78 characters is the maximum. 
  110.  
  111. Maximum Height:     This sets the height of the Ticker window in 
  112.                     characters. 
  113.  
  114. Direction:          Enter 'F' for Ticker to traverse the database's text
  115.                     items in forward order.  Enter 'B' for backward
  116.                     (reverse) order.
  117.  
  118.  
  119.  
  120.  
  121. Active Categories
  122. -----------------
  123.  
  124. This form will also be called automatically the first time Ticker is run, 
  125. immediately after options are set.  Thereafter, you must press 'c'.
  126. The text items in the database are grouped into categories, such as 
  127. "Jokes", "Trivia", etc.  Use this Categories form to configure Ticker so
  128. that only entries from certain categories are displayed.  Press 'Y' for 
  129. each category that you wish to be active and type 'N' for each that you
  130. wish to be inactive.
  131.  
  132. Leave the categories form by pressing F10 (or ENTER from the last field).
  133. Pressing ESC cancels any changes you have made. 
  134.  
  135.  
  136. Key Commands While Ticker is Active
  137. -----------------------------------
  138.  
  139. ENTER, 'j'                      jumps to the next database entry
  140. 'a'                             displays "About Database" information
  141. 'q'                             quits Ticker
  142. 'h'                             displays help
  143. 'd'                             displays the database form
  144. 'o'                             displays the options form
  145. 'c'                             displays the categories form
  146.  
  147.  
  148.  
  149.  
  150. ********************** ROLLING YOUR OWN ******************************** 
  151.  
  152. You can generate a .TCK Ticker database file by typing in a simple ASCII 
  153. text file (using the below format) and then running the included 
  154. TICKPACK.EXE program against it. When you have typed in your text, create 
  155. your database file by typing 
  156.  
  157.                         TICKPACK  yourfile.txt
  158.  
  159. TICKPACK will create a file called yourfile.tck, which will be a valid 
  160. database file.  If there are any errors in your text file, TICKPACK will 
  161. indicate as such and not create the .TCK file.  .TCK files should be
  162. 48K (49152) bytes or less.
  163.  
  164.  
  165. Tickpack Text File Format
  166. -------------------------
  167.  
  168. The '\' (backslash) character is the delimiter character.  All text must 
  169. be preceded by a command defining what type of text it is.  Commands 
  170. should be typed on lines by themselves.  The commands are as follows.
  171.  
  172.  \COMMENT\    : all text following this until the next command is ignored 
  173.  \TITLE\      : title of database (one line or up to 30 characters)
  174.  \ABOUT\      : information to be displayed when the user chooses "About"
  175.                 from the Ticker program (5 lines of up to 40 characters
  176.                 each)
  177.  \CATEGORIES\ : category names.  Each category should be on a separate
  178.                 line and up to 30 characters each.
  179.  \TEXT\       : This indicates that all text items will follow.  Within
  180.                 this section, precede all text items by the category name
  181.                 or number within backslashes.  Categories are numbered
  182.                 starting at 0 using the order you typed them in in the
  183.                 \CATEGORIES\ section.
  184.  
  185. You should randomize entries of different categories within your text 
  186. file because Ticker reads the database sequentially, and one would 
  187. generally not want text items of all one category to appear before any of 
  188. the next category begin.
  189.  
  190. Following is an example of a valid text file.
  191.  
  192.  
  193.  
  194.  
  195. \TITLE\
  196. My Database
  197. \ABOUT\
  198. If you find this database engaging, a
  199. $5.00 payment would be appreciated.
  200.   Management Systems Group * 215-446-9083
  201. P.O. Box 763 * Havertown, PA 19083
  202. New databases available upon request.
  203. \CATEGORIES\
  204. Happy Jokes
  205. Sad Jokes
  206. Mean Jokes
  207. Dumb Jokes
  208. \TEXT\
  209. \0\
  210. This is my first happy joke. 
  211. This is the punch line.
  212. \1\
  213. This is my first sad joke. 
  214. This is the punch line.
  215. \3\
  216. This is my first dumb joke.
  217. This is the punch line.
  218. \2\
  219. This is my first mean joke.
  220. This is the punch line.
  221. \1\
  222. This is another sad joke.
  223. This is its punch line.
  224. \Mean Jokes\
  225. This is another mean joke.  Note that you do not have to use numbers.
  226. This is the punch line.
  227.  
  228.  
  229.